Open hours: 8.00-18.30 MOn-Fri

Screw Compressors CSHP - CSHP95103-320P

Bitzer Screw Compressor CSHP - CSHP95103-320P

Screw Compressor CSHP - CSHP95103-320P

The new CSHP series is based on the proven design elements of the innovative BITZER compact screws, which are recognized as a benchmark around the world. The CSHP series has been specially developed for use in air cooled liquid chillers and heat pumps with the natural, low-GWP refrigerant propane (R290). Other hydrocarbon refrigerants may be used on request. Some characteristics of the CSHP series differ technically from those of the standard CSH series, including electrical accessories, safety devices, oil charge and the lubrication system. R290 is a flammable refrigerant of the A3 safety group. Special safety regulations apply to the design, operation and maintenance of refrigeration systems and heat pumps with flammable refrigerants. The CSHP series is available exclusively for OEM customers for use in series products.For more information, please see BITZER technical information KT-660 ‘Application of propane (R290) and propylene (R1270) with semi-hermetic compressors’.

  • Adjustment of the internal volume ratio (under full- and part-load) based on the extended range of applications
  • Reduction of internal flow losses
  • Optimisation of the oil management system
  • Additional cooling for extreme operating conditions through developed direct liquid injection or external oil cooling with actively controlled oil circulation level
Type Displacement Weight Max. pressure (LP/HP) Connection suction line Connection discharge line Oil type R290
2900 RPM 50 Hz 3500 RPM 60 Hz
SI 1015 m³/h 1225 m³/h 1500 kg 19 / 28 bar DN 125 DN 100 SHC230 (Standard)
IP 35845 CFH 43261 CFH 3308 lb 275 / 400 psi 5'' DN 100 SHC230 (Standard)

Extent of delivery (Standard)

Type Enclosure class Oil heater Oil separator Oil filter Discharge gas temperature sensor Start unloading Capacity Control - 4-step Capacity Control - infinite Built-in check valve Motor protection Oil charge
SI IP54 300 W (Standard) Standard Standard Standard Standard 100-75-50-25% (Standard) 100-25% (Standard) Standard (FI) SE-E1 (Standard), SE-E3(Standard for 660-690V) 32,0 dm³
IP IP54 300 W (Standard) Standard Standard Standard Standard (FI) 100-75-50-25% (Standard) 100-25% (Standard) Standard SE-E1 (Standard), SE-E3(Standard for 660-690V) 1126 fl oz

Motor protection included for mounting in the system’s switch board

Available Options

Type Oil level switch Discharge shut-off valve Suction shut-off valve Shut-off valve for ECO with muffler Liquid injection with integrated nozzle Bridges for DOL start Vibration dampers Motor protection
SI min / max OLC-D1-S (Option) Option Option Option Option Option Option SE-i1 (200-690V)
IP min / max OLC-D1-S (Option) Option Option Option Option Option Option SE-i1 (200-690V)